Wattscraft Wattscraft
  • Home
  • Shop
    • Hull Kit Sets
    • ASP Parts
    • SSS Parts
  • About
  • Kit Instructions
  • Hull, Pump & Engine Guide
  • Turn-Key
  • Contact
0 items / $0.00
Menu
Wattscraft
0 items / $0.00
Jet Boat Hull Kit Wattscraft Mini Jet Boat NZ Jet Boat NZ Kit Set Boat Hull Kit NZ
Home Hull Kit-Sets 4.3m Jet Boat Hull Kit

4.3m Jet Boat Hull Kit

$6,100.00

A full size jet boat!
Good for V6’s small V8’s and the pumps to match.

10 & 5mm hull, four longitudinal stringers

3mm topsides

15 degree deadrise

Length  –

Overall: 4289mm

Transom step: additional 350mm

Width  –

Widest point: 1870mm

Chine to chine: 1558mm

Height  –

Overall: 1140mm

Chine to gunwale: 676mm

Interior –

Inside gunwale: 1496mm

Transom to dash: 2573mm

Choose from the following boat options:

Transom Step 1 Transom Step

Straight Handrails 2 Straight Handrails

Curved Handrails 3 Curved Handrails

Trailer Frame Kit 4 Trailer Frame Kit

Trailer Parts Kit 5 Trailer Parts Kit

Hardox Keel Strip 6 Hardox Keel Strip

Under Seat Petrol Tank 7 Under Seat Petrol Tank

Plywood Floor 8 Plywood Floor

Foredeck Bulkhead 9 Foredeck Bulkhead

    • Description
    • Additional information
    Description

    Boat Options

    Information on the hull kit options shown above. 

    Standard parts
    Transom Step
    Straight Handrails
    Curved Handrails
    Trailer Frame Kit
    Trailer Parts Kit
    Hardox Keel Strip
    Plywood Floor
    Foredeck Bulkhead
    Under seat petrol tank
    Standard parts

    The standard parts for a river hull kit are shown above. More information on the parts and assembly is available in the instructions page.

    Transom Step

    Jet Boat Hull Kit Wattscraft Mini Jet Boat NZ Jet Boat NZ Kit Set Boat Hull Kit NZ


    Transom Step

    A stepped transom is available on all our river jet boat hulls. This option replaces the standard sides and flat transom with extended side panels and the stepped transom parts shown below.

    Note: This must be ordered at the same time as the hull kit.

    Pros:
    – Looks great
    – Convenient for stepping off the river bank or climbing onto the boat from the water
    – Splash guard for pump
    – Extra storage

    Cons:
    – A little bit of weight
    – Additional cost
    – Additional work

    Straight Handrails


    Straight handrail set

    Four basic straight handrails. 25mm diameter tube, ready to TIG weld on.

    • 2 x 400mm long transom handrails for pushing
    • 1 x 500mm long passenger handrail for the dash
    • 1 x 230mm handrail for the front of the foredeck

    Curved Handrails


    Curved handrails

    A curved 25mm diameter pair of handrails to suit the foredeck of WattsCraft kits. Curved rails shown on the bow of a 3.4m WattsCraft in image above.

    Comes ready to TIG weld on.

    Trailer Frame Kit

    Trailer frame kit

    Heavy duty trailer frame kit to suit WattsCraft hulls. Includes strong alloy side guides.

    4mm 5083 marine aluminium. 3mm Mudguards. 10mm Radius folds. Doubling plates for all butt joins. UHMWPE strips for bunks, mudguards & side poles.

    Does not include components. See trailer parts kit.

    Trailer Parts Kit

    Trailer parts kit

    Trailparts parts kit includes:

    Coupler 2000kg 1 7/8″

    Rated safety chain x 2

    2 x Stainless steel D-shackles (captive pin)

    3:1 Winch, 4m synthetic cable & stainless steel hook

    HD Jockey wheel, solid wheel

    LED light kit, 8m cables, plug & holder

    WOF holder

    Leaf springs, hardware & mounting beams.

    Custom pre-built pre-galv axle (65mm drop), hubs & stubs

    Alloy wheels & tyres (incl spare)

    Side marker lights for trailers over 2m

    Hardox Keel Strip

    IMG_8224


    Steel keel strip

    CNC cut Hardox 450 (high strength steel) keel armouring. This makes your keel as rock-proof as possible. Well worth it if you run nasty very shallow rocky rivers regularly. We all have this on our own boats.

    Its does add a fair bit of weight so boats with smaller engines will need to think twice. Also no good if you use your boat in the salt.

    Slides much better than alloy but not as good as plastic.

    Comes bent, pre-drilled and countersunk. This makes it very easy to install & is the reason it costs a fair bit.

     

    Plywood Floor

    IMG_0731

    9mm Hardwood plywood floor

    CNC cut plywood floor to fit into your hull nicely. Ply is a nice contrast to the alloy and wears well with oiling once a year.

    Helps keep the noise down and anti-slip.

     

    Foredeck Bulkhead

    Fortdeck bulkhead


    Foredeck Bulkhead

    A bulkhead to seperate the area under the foredeck. This replaces the standard foot rest bulkhead.

    Pros:
    – Works well if you plan to add a access hatch to the foredeck
    – Extra storage

    Cons:
    – A little bit of weight
    – Additional cost
    – Additional work

    Under seat petrol tank

    Under seat petrol tank kit

    ~120L Petrol tank for under the rear seat of the 4m+ hulls.

    • Outer skin is two pieces to minimise welding
    • Includes 2 x baffles
    • No fittings or cut-outs included

    Additional information
    Weight - kg
    Size

    3 Meter, 3.3 Meter, 3.6 Meter, 3.8 Meter, 4.3 Meter, 4.6 Meter

    Glenorchy, Otago, New Zealand
    Ph: +64 27 426 2215

    Menu
    News   |   FAQs   |   Safety   |   T&C
    Join our newsletter

    Wattscraft 2022
    Privacy Policy
    • Home
    • Shop
      • Hull Kit Sets
      • ASP Parts
      • SSS Parts
    • About
    • Kit Instructions
    • Hull, Pump & Engine Guide
    • Turn-Key
    • Contact
    Shopping cart
    close